Combining passion and research, thanks to our in-house state-of-the-art laboratory, the SIREC formulations produced in our own plant using high-quality raw materials to make epoxy resin flooring and wall coatings contain no volatile substances, they are non-toxic, odourless, regularly tested and certified for being in contact with foodstuffs.

 

Formulated products

Colbeton

Description

Bi-component product based on modified epoxy resins and aliphatic cycle hardeners, solvent-free and added mineral fillers.

Use

Epoxy adherent for concrete and mortar, prepared to fill gaps in castings, coating of concrete facings, reinforcement of load-bearing structures and repairs, restorations and rebuilding in general.

Request information
Elastoplast

Description

Elastic bi-component product based on modified epoxy resins, solvent-free and added mineral fillers.

Use

Joint sealer for resin, concrete industrial flooring; the prerogative of this elastic preparation is its perfect adhesion to the walls of the joint; therefore it follows their movements, protecting the walls when vehicles pass.

Request information
Epofinish

Description

Bi-component preparation, based on modified epoxy resins and aliphatic and/or aliphatic cycle curing agents, solvent-free, added with wear-resistant aggregates.

Use

Formulation for the finishing of resinous flooring with non-slip, anti-dust and anti-wear properties, waterproof and resistant to chemicals.

Request information
Epofinish/ac

Description

Bi-component preparation based on modified epoxy resins and polyamine-adduct hardeners, in aqueous dispersions with added mineral fillers.

Use

Formulation for the finishing of resinous, transpiring flooring with non-slip, anti-dust properties, waterproof and with good resistance to abrasion and chemicals.

Request information
Epofinish/ast

Description

Bi-component preparation based on modified epoxy resins, solvent-free, with added conductive fillers and anti-wear aggregates.

Use

Formulation for the finishing of epoxy resin flooring with electrical conductivity properties, anti-static according to CEI 64-4 standards, with anti-dust and anti-wear properties, waterproof.

Request information
Epofinish/s

Description

Bi-component preparation, based on epoxy resins and polyamine-adduct hardeners, in the solvent state, with added conductive fillers and anti-wear aggregates.

Use

Formulation for the finishing of epoxy resin flooring with electrical conductivity properties, anti-static according to EN 1081 standards, with anti-dust and anti-wear properties, waterproof.

Request information
Epoxiglass

Description

Bi-component preparation based on modified epoxy resins and aliphatic and/or aliphatic cycle curing agents, solvent-free, with added mineral fillers.

Use

Intermediate formulation for smoothing and finishing the protective covering of masonry in general and the lining of containers for foodstuffs.

Request information
Epoxiglass/ac

Description

Bi-component product based on modified epoxy resins and curing agents, polyamine adducts in aqueous emulsion with added mineral fillers.

Use

Intermediate formulation for smoothing and finishing the protective coating of masonry in general.

Request information
Epoxitar

Description

Bi-component preparation based on modified epoxy resins, coal tar, in the solvent state with added fillers and additives.

Use

Formulation for epoxy coal tar coverings, for the protection of industrial water tanks, for waterproofing iron structures, pipe-work and sewer conduits.

Request information
Finishpol

Description

Bi-component preparation based on polyester resin and aliphatic polyisocyanate hardener, in the solvent state with added mineral fillers.

Use

Formulation of polyurethane for the finishing of resinous flooring with anti-scratch, anti-dust properties, waterproof, non-slip and chemical resistant.

Request information
Floorcoat/a

Description

Bi-component preparation based on modified epoxy resins and polyaminoamide hardener, in the solvent state with added mineral fillers.

Use

Formulation for the protective covering of tanks, metallic supports, in concrete and asphalt; elastic, waterproof, with good chemical resistance and strength.

Request information
Floormalta

Description

Bi-component preparation based on modified epoxy resins and aliphatic and/or aliphatic cycle curing agents, solvent-free.

Use

Fluid formulation to be mixed with QUARZO MIX to make epoxy screeds for industrial floors and to repair and/or reinforce joints.

Request information
Floormalta/ast

Description

Bi-component preparation based on modified epoxy resins, solvent-free, to be mixed with FILLER AST.

Use

Fluid formulation to be mixed with FILLERS/AST to make epoxy screeds for anti-static industrial flooring according to CEI 64-4 standards.

Request information
Floorplan

Description

Bi-component preparation based on modified epoxy resins, aliphatic cycle curing agents and mineral fillers, solvent-free.

Use

Very fluid formulation with levelling properties to be mixed with mineral fillers to make epoxy resin flooring, with waterproof, non-slip properties, with high mechanical resistance.

Request information
Floorplan/ac

Description

Bi-component product based on modified epoxy resins and polyamine-adduct hardeners in aqueous emulsion and added mineral fillers.

Use

Very fluid formulation with levelling properties to be mixed with mineral fillers, for epoxy resin flooring, breathable, waterproof, non-slip, with good mechanical strength and wear.

Request information
Floorplan/ar

Description

Bi-component product, based on modified epoxy resins, hardeners and aliphatic / aliphatic cycle curing agents and mineral fillers, solvent-free.

Use

Very fluid formulation with levelling properties to be mixed with mineral fillers, for epoxy resin flooring, breathable, waterproof, non-slip, high chemical and mechanical resistance.

Request information
Iniectofloor

Description

Fluid bi-component preparation based on modified epoxy resins and mineral fillers and extenders.

Use

Formulation for injection in order to restore stability and monolithic quality to concrete slabs, cracks and large fissures in walls and other structural units.

Request information
Idroglass

Description

Triple-component preparation based on modified epoxy resins and polyamide curing agents, in aqueous dispersions with added mineral fillers.

Use

Formulation for use as a primer and anchorage for damp concrete surfaces in the presence of rising damp to make protective coverings and epoxy resin flooring. Insulating primer for cover tanks, swimming pools and underground premises.

Request information
Ironcoat

Description

Bi-component preparation based on modified epoxy resins, in the solvent state, with added mineral fillers.

Use

Anchoring undercoat for epoxy coverings or for coverings of different type, with the foremost function of rust-proofing for surfaces in iron, light alloy and zinc-plated iron.

Request information
Primer/ag

Description

Bi-component preparation based on modified epoxy resins and aliphatic and/or aliphatic cycle curing agents, solvent-free, with added mineral fillers.

Use

Formulation for use as a primer and anchorage for epoxy resin flooring, protective coverings for concrete and waterproof, chemical resistant coverings.

Request information
Primer/ag-ast

Description

Bi-component preparation based on modified epoxy resins, solvent-free, with added mineral fillers and conductive fillers.

Use

Formulation for use as a primer and anchorage for anti-static, epoxy resin flooring according to CEI 64-4 standards.

Request information
Primer ags

Description

Bi-component preparation based on modified epoxy resins and aliphatic cycle curing agents, solvent-free, with added mineral fillers and mixed with special adhesion enhancers.

Use

Formulation for use as a primer and anchorage for epoxy resin flooring and waterproof, chemical-resistant coverings on ceramic materials in general.

Request information
Primer/r

Description

Bi-component preparation based on modified epoxy resins and aliphatic and/or aliphatic cycle curing agents, solvent-free, with added mineral fillers.

Use

Intermediate formulation for the saturation and shaving of epoxy resin flooring and protective coverings for concrete, waterproof, resistant to chemicals.

Request information
Primer/r-ast

Description

Bi-component preparation based on modified epoxy resins, solvent-free.

Use

Intermediate formulation for the saturation and shaving, with electrical conductivity properties, of anti-static epoxy resin flooring according to CEI 64-4 standards.

Request information
Resiplast

Description

Bi-component preparation based on modified epoxy resins and polyether-polyamine curing agent, with an added clear extender, solvent-free, with added mineral fillers.

Use

Formulation for the construction of decorative protective coverings for concrete structures in general, subject to weathering, smog, brackish; for covering walkable industrial coverings; sealing of expansion gaps in industrial floors; connecting base between floor and vertical structures.

Request information
Saturbeton

Description

Bi-component preparation based on modified epoxy resins, in the solvent state.

Use

Formulation for reclaiming and regenerating degraded friable surfaces; anti-dust and anti-oil protective for concrete floors.

Request information
Saturbeton/h

Description

Bi-component preparation based on modified epoxy resins and hardener, and polyamine-adduct hardeners, in aqueous dispersion.

Use

An anchoring primer of the support for the application of transpiring protective coverings for concrete. Applied in successive coats achieves anti-dust and anti-oil treatments with very good wear resistance values.

Request information